Installing a geyser might seem like a complex task, but it is actually quite straightforward if you follow the correct steps. The key to success is to prepare yourself by reading the manufacturer's instructions, gather the necessary tools and have a basic knowledge of electrical wiring. In this article, we will explain how to install a geyser step by step, so you can have hot water in no time.
Step 1: Choose the Right Location
Before you even purchase your geyser, you need to choose the right location for it. It should be installed indoor and sheltered from exposure to the elements. You should also ensure that there is ample space around the geyser for future maintenance or repairs. The location should be easily accessible and have a power supply nearby.
Step 2: Gather the Necessary Tools and Materials
Before you begin, ensure that you have all the necessary tools and materials to complete the installation process. You will need the following: goggles, gloves, wire strippers or pliers, screwdrivers, a drill, adjustable wrenches, mounting brackets, and the geyser.
Step 3: Turn Off the Power
Your safety is paramount, and before beginning any electrical work, you must switch off the power. Turn off the circuit breaker or fuse that controls the electrical supply to the geyser.
Step 4: Install the Mounting Brackets
Most geysers come with mounting brackets. First and foremost, attach the brackets to the wall or the ceiling using screws and check that these brackets are level. Make sure that the brackets are sturdy enough to properly support the weight of the geyser.
Step 5: Install the Geyser
Lift the geyser onto the brackets which are already installed on the wall. Ensure that it is in the right position, and then secure the geyser to the brackets. Use an adjustable wrench to tighten the bolts as tightly as possible.
Step 6: Connect the Plumbing
The next step is to connect the plumbing. Connect the cold inlet pipe to the geyser's inlet valve and the hot outlet pipe to the outlet valve. Tighten the connections with adjustable wrenches to prevent any leaks.
Step 7: Electrical Connection
The final step is to make the electrical connection to the geyser. Use wire strippers to remove the protective insulation from the wires. Check the manufacturer’s instructions for the exact wiring diagram for the geyser. Wire the geyser correctly and tightly with the right connections, and ensure that the wires are adequately insulated.
Note:
If you are not confident with electrical wiring, do not hesitate to call an electrician to connect the geyser to the power source.
Step 8: Filling the Tank
Once all the connections are made, fill the geyser with water. Check for any leaks or drips from the plumbing and electrical connections. After you verify there are no leaks, turn on the power, and the geyser should start heating the water immediately.
In conclusion, installing a geyser is an easy task, provided you follow the correct procedure. You can save a lot of money by installing the geyser yourself instead of hiring someone to do it. However, if after reading this guide you are still not confident to proceed, feel free to seek the assistance of a qualified electrician.
