In any household, one of the most essential appliances is a geyser, especially if you live in cold regions or during winters. It provides hot water that can be used for various purposes like bathing, washing clothes, and cleaning dishes. However, if your geyser starts leaking, it can create inconvenience and even lead to serious accidents. It is vital to take immediate action to fix the leakage to avoid further damage.
Step-by-Step Guide to Fix a Leaking Geyser
1. Turn Off the Power Supply
The first and foremost thing that you should do is turn off the power supply to the geyser. You can easily find the main supply switch or turn off the circuit breaker in your electrical board. For your safety, it is important not to skip this step.
2. Turn Off the Water Supply
The next step is to turn off the water supply to the geyser. You will find the water supply valve near the inlet of the geyser. Turn the valve in a clockwise direction to close it.
3. Drain the Remaining Water
Before you start fixing the leaking geyser, it is essential to drain the remaining water from the tank. You can connect a hose to the drain valve and direct it to a nearby drainage point. Turn the valve in an anti-clockwise direction to open it and let all the water drain out.
4. Find the Leakage
After draining the water, try to locate the leakage in the geyser. It can be due to a faulty valve, broken pipe, or a hole in the tank. If you are not sure about the source of leakage, it is best to call a professional plumber.
5. Replace the Faulty Part
If you have identified the part that is causing the leak, you can replace it. You can purchase the required replacement part from a hardware store. It is recommended to consult the user manual or YouTube videos for help in replacing the faulty part.
6. Check for Loose Connections
It is also possible that the leak is due to loose connections between the geyser and the inlet/outlet pipes. Check for any loose connections and tighten them. This may fix the leakage issue without needing to replace any parts.
7. Reassemble the Geyser
Once you have replaced the faulty parts or fixed the loose connections, reassemble the geyser. Close the drain valve, turn the water supply valve back on, and switch on the power supply. Wait for a few minutes to let the water get heated and check if the leakage issue persists or not.
A leaking geyser can cause inconvenience and even lead to severe accidents. It is important to take immediate action to fix the issue. You can follow these steps to fix the leaking geyser on your own or seek professional help if needed. Remember to always prioritize your safety and turn off the power supply before starting any work on the geyser.