Are you facing the problem of irregular water flow from your geyser? A geyser pressure valve may be the culprit. Adjusting the pressure valve is relatively easy and can be done with a few basic steps. In this post, we will guide you through the process of adjusting a geyser pressure valve to ensure that you have a smooth flow of hot water in your home.
Step 1: Switch off the Geyser
The first step is to switch off your geyser to avoid any accidental burns. Remember, dealing with a pressure valve can be dangerous if the pressure and heat are not controlled. You can switch off the geyser from its main switch, which is usually mounted on the wall near the geyser.
Important:
Make sure the geyser is turned off and cooled down before inspecting the pressure valve. Otherwise, you may get scalded by the hot water or steam that can cause severe burns.
Step 2: Locate the Pressure Valve
The pressure valve is usually mounted on the geyser's side or at the top. It is a small brass valve with a lever on top, and you can easily locate it. Once you have found it, inspect the lever to see if it's adjustable or not.
Step 3: Adjust the Valve
- Check: Before adjusting the valve, check the current pressure setting to get an idea of how much pressure needs to be adjusted. For this, you'll need a pressure gauge that can be attached to a faucet near the geyser.
- Open: Attach the pressure gauge to a faucet and open the hot water line for a few seconds. This will give you an accurate reading of the current pressure.
- Adjust: Now that you know the current pressure, you can proceed to adjust the valve. You can adjust the valve by pushing or pulling the lever. Use your pressure gauge to ensure that you adjust the valve to the optimal pressure setting recommended for your geyser model.
Note:
It's important to refer to your geyser's user manual to check the recommended pressure settings. The wrong pressure settings can lead to damages to the geyser's tank or a reduced lifespan of the appliance.
Step 4: Test the Geyser
Once you have adjusted the valve, it's time to test your geyser. Turn on the geyser following the user manual instructions, and let it run for a few minutes. Check if the water flow is smooth and without any fluctuations.
If you still face irregular water flow, try repeating the above process or contact a professional plumber to inspect the geyser and valve.
Conclusion:
Adjusting the geyser pressure valve can be a simple DIY task. With a few basic steps, you can enhance the flow of hot water from your geyser. However, it's essential to take adequate precautions while handling any appliance with hot water and steam. Refer to your user manual for the recommended pressure setting before making any adjustments.
